| Name | 15 slots battery swapping cabinet | |
| Specifications | 1200(W) * 600(D) * 1850(H)
(subject to final actual figure) |
|
| Slot size | 260(W) * 420(D) * 220(H) | |
|
Charging equipment |
Installation | Vertical |
| Input voltage | AC 187-265V | |
| Input frequency | 50-60Hz | |
| Maximum power of the whole machine | 9KW | |
| Maximum power per slot | 1800W | |
| Charging Current | 20A | |
| Idle | <40W | |
| Charger | 3KW | |
| Input Impedance | ≥100KΩ | |
| Power Input | Single-Phase AC220V, 10 mm | |
|
Battery compartment features |
Number of slots | 15 |
| Output voltage | DC40-90V (Compatible for batteries in 48V/60V/72V) | |
|
Slot indicator |
1. Light off – Empty slot
2. Green light flashing – Connected, not charging 3. Green light steady – Ready for battery swap 4. Red light steady – Charging · 5. Red light flashing – Fault detected |
|
|
Functional design |
Speaker | 0.5W |
| Communication Protocol | CAN/RS485/One-line communication | |
| Charging Mode | Scan the code to charge automatically | |
| Payment Methods | Scan code to pay | |
Submerged fire protection
Anti-theft lock
Air Duct Cooling
IP54 protection
Front/side/back maintenance
Android touch screen
Visual smart meter
Terminal use allows full debugging
Support 48/60/72V lithium batteries
Adapt To large cabinet sizes
Cable/Pin connector
Suitable for 90%2/3 wheeled vehicles
PTC low temperature heating solution
Bluetooth /Verification code swapping
Backup power supply
99.94% successful rate of swapping
4G network, main control, electric power protection system;
IP54 protection class;
Automatic fire extinguishing system for individual slot;
Real-time communication with battery BMS, fault alarm;
Intelligent battery charging status indication;
Intelligent cloud platform, phone APP to view nearby station, and manage the swapping progress;
Support remote software upgrade, remote grid power supply switch on and off, remote disable and enable specific slot.
1.Scan the QR code via WeChat
2.The device automatically opens the empty slot, placed the depleted battery inside and close the slot.
3.The device automatically open a new slot with fully charged battery, take the battery out and close the slot
4.Close the slot and continue the journey.
